9
10
Next, prepare the servo
cable supplied with this stage.
As you have done with previous
cables, identify the side of the
connector with PUSH printed
on it. The protective pad will be
fitted to this side.
Remove a protective pad from
the sheet saved from Stage 3,
and press it into place as shown
onto the servo cable’s connector.
Repeat for the connector at the
other end of the cable.
7
Turn the forearm frame over and check that the hole in
the thumb is in line with the remaining screw hole in
the forearm frame.
8
Fit an M2 x 5mm pan-head screw in the hole and
carefully tighten it, to secure the mount.
Assembled
left forearm
frame
The first parts of Robi’s left arm
have been assembled, and another
servo cable is ready for use in the
coming assemblies.
THE SERVO CABLE
80
