3
Operation
Connect to the first headset or music receiver
1.
Take your Bluetooth headphone or Bluetooth music receiver
2.
Enter “pairing” mode, please consult your manual for further
information
3.
The BTT-1000 will auto connect the “pairing” devices, when
BTT-1000 and headphone or music receiver are connected, the
LED on BTT-1000 will go permanent lighted.
Connect to the second headset or music receiver
1.
Take your second Bluetooth headphone or Bluetooth music
receiver
2.
Enter “pairing” mode, please consult your manual for further
information
3.
Press the “pairing” button on BTT1000 for one second, the LED
will blinking for seconds, BTT1000 is searching for the second
Bluetooth headset or music receiver, at the same time, the audio
on first connected device will be disconnected.
4.
When BTT-1000 and headphone or music receiver are connected,
the LED on BTT-1000 will go permanent lighted
Note:
1.
BTT-1000 can connect two Bluetooth A2DP receivers at the same time,
In some scenario, if you want to connect another A2DP device, you need
to reset the BTT-1000 for new connection.
2.
In some case, the first paired device will not be activated, you need to
power off and on the first paired device, and also press the pairing
button on BTT for 1 second to wake the first paired device.
Reset Method
Press the “pairing” key on BTT-1000 for 5 seconds, then release it, the
LED on BTT-1000 will go blinking for searching “pairing” A2DP devices
nearby.
Note: the effective range of BTT-1000 is 33 feet (10M)
(light of
sight). For the best performance we recommend you to let
BTT-1000 visible. Do not block the bluetooth antenna; otherwise
the distance will be shorter.
