DCU Tecnologic 34153500, Руководство пользователя

Страница: 15 / 35

Call status
· Double-Click [+/play] button to answer the call.
· Double-Click [+/play] button to end call.
· Long press [+/play] button to refuse to answer the
call.
Indicator light description
· Alternate red and blue: pairing state.
· Blue flashes: Connect successfully.
· The Red light is always on: charging.
· The Blue light is always on: full charge.
PRODUCT PARAMETERS:
Bluetooth version: 5.0
Weight: 31g
Battery: 230mAh
Charging: About 2 hours
Playtime: 8h 70% volume
Microphone: - 42 db
Waterproof: IPX5
Distance Bluetooth: 10 meters
Input: 5V/500mA
Protocol: A2DP, AVRCP, HSP, HFP
TECHNICAL AND CUSTOMER SERVICE:
DCU Advance Tecnologic
c/ Industria 34, 17005-Girona (Spain)
T. +34972244105
Email: info@dcutec.com
www.dcutec.com
16
TURN OFF:
Hold down [+/play] button for about 3 seconds. Indicator
light goes out.
CHARGING:
Use the provided Type-C cable to charge the headphones.
After Bluetooth connection with your phone, you can see
the headphone battery on the screen.
Charge the headphones when the battery is low, do not let
them discharge completely.
Note: 5V/1A or 5V/2A maximum charging devices such as
standard mobile phone chargers can be used. Do not use
fast charging chargers.
INSTRUCTIONS FOR:
· Long press [+/play] button: turn on/off the
headphones
· Long press the [+] button for 1 second to wake up
Siri
· Long press [-] to disconnect the Bluetooth device
State of play
· Double-click [+/play] button to pause the playback
· Double click [-] button for the next song
· Click [+] button to increase volume
· Click [-] button to decrease volume
TURN ON:
Hold down the button [+/play] for about 3 seconds. When
the light flashes alternately red and blue it means the
earphone has been turned on.
BLUETOOTH CONNECTION:
When the headset is turned on properly for the first time,
the indicator light turns blue-red and the headset enters
the Bluetooth pairing status.
Search for “
dcu_bone_conduction” in the Bluetooth
setting, click connect, when the connection is successful
the led light turns off.
REPLACEMENT OF MATCHING EQUIPMENT AND
RECONNECTION:
Disconnect the current paired device from Bluetooth, the
headset indicator flashes red and blue alternately. With
the other device search for “ dcu_bone_conduction” in
the Bluetooth settings and click to connect.
The DCU bone conduction headphone supports automatic
back connection and matching device, so it will be
automatically connected after normal power-on.
For the last connected device, make sure that the
Bluetooth is open properly.
ENG