Secure fit:
1. Please check the "L" and "R"
2. Put the earbuds on your ears. Please
adjust the angle according to your ears
and make surethey fit in the ear
securely and comfortably.
Power ON/OFF:
Power on:
Open the charging case cover and the
earbuds automatically power on.
Power off:
Put the earbuds into the charging case,
the earbuds will automatically power
off after closing the charging case
cover.
The earbuds will be power off
automatically when there is no
connection of the left/ right earbud for
about 5 min.
Bluetooth connection:
1. Open the charging case.
The left and right earbud will automatically
power on and pair.
2. Ready to pair (orange/green light flashes
alternately).
Until the left/right earbud flashes orange/green
light alternately every 7 seconds, the earbuds
are paired successfully.
3. Open your Bluetooth device setting and
search “ANC_DCUTEC”, then click to
complete the connection.
4. If the connection fails, please put the
earbuds back into the charging box and repeat the above steps.
* Please tear off the insulation sticker on the earbuds contacts before using it.
* After the first connection, the earbuds will automatically connect back to the last
paired device (Bluetooth device needs to be turned on).
Battery display sync:
Support iOS/Android mobile phone displays the earbuds battery level near the upper
right corner of the screen.
Clear and repairing Bluetooth connection:
When the charging case is in the charging state, put the earbuds into the charging
case, triple-tap the earbuds touch panel to clear Bluetooth pairing record. The
earbuds LED indicator lights will flash orange and green lights on for 1s.
Noise Cancelling & Ambient Sound:
Noise cancelling mode
Active noise cancellation (ANC) reduces unwanted noise
providing a clearer, more lifelike audio performance.
You can choose the noise cancelling mode based on your
listening preferences and environment.
Ambient sound mode
Turn on ambient mode to control how much surrounding
noise you let in. With quick ambient mode, you can
listen in on street traffic, catch flight announcements,
and hear when your kids or co-workers call out to you.
Summary: Turn on the noise cancellation function of your headphones if you want
to listen to music without interruption of surrounding noise. Turn on Ambient
Sound Mode if you want to hear the sounds around you
Switch between noise cancellation and ambient sound modes
1. Please make sure earbuds are power on, enable the noise cancelling function.
2. Long press earbuds touch panel for 2s, switch to ambient sound mode.
3. Long press earbuds touch panel for 2s again, enable the noise cancelling
function.
4. Long press earbuds touch panel for 2s again, noise cancelling function is off.
Noise reduction mode switch
When the headset enters the TWS state, press and hold the multi-function button
for 2 seconds.
*(When powered on, ANC is off by default)
Note:
* Each Long press earbuds touch panel changes the function.
Long press 2s.
ENG
20
