13
Figure 2
6
Figure 2
6
a
Rotate the top of the coupler coun-
ter clockwise to extend the coupler
to the to the "OFF"position.
Coupler
extended
8.
Locate the CO
2
tank in the corner of the refrigerator as
shown in Figure 2
5
and secure with the chain. Close
the faucet handle on the tower.
9.
Hooking up the keg coupler to the keg: Verify the cou-
pler is in the "OFF" position (see Figure 2
6
a).Align the
lugs on the keg with the corresponding openings on the
keg coupler and turn clockwise until the coupler stops
(about 90°). Push down and twist the top of the coupler
clockwise to allow gas to enter the keg.
Figure 2
5
Chain-The chain is fastened and taped
to the top of the interior liner. Remove
the tape and secure the CO
2
tank in
place in the back right corner.
Push faucet handle back toward
tower to close the faucet
USING YOUR BEER DISPENSER
Lugs
on keg
Figure 2
6
b
