16
Refer to the following chart:
[1] - A, B, C, 1
[6] - P, Q, R, 6
[2] - D, E, F, 2
[7] - S, T, U, 7
[3] - G, H, I, 3
[8] - V, W, X, 8
[4] - J, K, L, 4
[9] - Y, Z, 9,0
[5] - M, N, O, 5
[0] - Space
7. When the required letter or number is displayed use the arrow keys (
) to scroll to the next letter.
8. When you are finished programming the Zone Label, press the
key, scroll to “Save,” then press
.
9. Continue from Step 2 until all Labels are programmed.
Viewing the Event Buffer from an LCD Keypad
The event buffer will show you a list of the last 500 events that have occurred on your system. You must use an
LCD keypad to view the event buffer.
1. Press
[Master
Code].
2. To select Event Buffer viewing, press
.
3. The keypad will display the event number, partition or area, and the time and date. Press
to switch
between this information and the event details.
4. Use the
keys to scroll through the events in the buffer.
5. To exit event buffer viewing, press
.
PK5500 Global Status Screen
When the keypad is loaned to global mode (pressing and holding the
key), you will see a Global Partition Sta-
tus screen. This shows basic status for up to 8 partitions d pending on the configuration of your system. The
screen looks similar to the example shown below.
1 3 4 5 6 7 8
A R ! N - - - -
Each partition is identified by a number. B
w each number is the current status of that partition.
A
- Partition is Armed
N
- Partition is Not Ready to Arm
R
- Partition is Ready to Arm
!
- Partition is in Alarm
-
- Partition is Not Enabled
Sensor Reset
Certain sensors, after having detected an alarm condition, require a
Reset
to exit the alarm condition (i.e. glass
break sensors, smoke detectors, etc.). Ask your alarm company if this function is required on your system.
To reset the detectors, press and hold the
Reset
key for 2 seconds or press
.
If a sensor fails to reset, it may still be detecting an alarm condition. If the sensor reset is successful, the alarm is
cancelled. If unsuccessful, the alarm will reactivate or continue.
http://www.ealarm.com.my
