DCS CPV2 SERIES, Руководство по установке

Страница: 7 / 32

7
C
E
G
H
D
A
B
F
COOKING SURFACE
6 CLEARANCE DIMENSIONS - ALL MODELS
FRONT
ISO
CLEARANCE DIMENSIONS
30” MODELS 36” MODELS 48” MODELS
inches (mm) inches (mm) inches (mm)
A
Minimum width of ventilation hood installed above cooktop 30’’ (762) 36’’ (914) 48’’ (1219)
B
Minimum vertical distance between countertop and cabinet extending above counter 18” (457) 18” (457) 18” (457)
C
Minimum clearance from left and right edge of cooktop to nearest vertical combustible surface 12” (305) 12” (305) 12” (305)
D
Minimum clearance from cooking surface to:
-
combustible surface centered above the cooking surface
- combustible covering for ventilation hood centered above the cooking surface
- non-combustible surface centered above the cooking surface*
54” (1372)
36” (914)
30’’ (762)
54” (1372)
36” (914)
30’’ (762)
54” (1372)
36” (914)
30’’ (762)
E
Maximum overall depth of overhead cabinetry 13” (330) 13” (330) 13” (330)
F
Width of cabinetry opening 30’’ (762) 36’’ (914) 48’’ (1219)
G
Minimum clearance from from rear edge of cooktop to:
- nearest
combustible surface
- nearest
non-combustible surface*
6” (152)
0” (0)
6” (152)
0” (0)
6” (152)
0” (0)
H
Maximum depth from wall to cabinetry face:
- projecting control panel
- flush control panel
24 3/16’’ (614)
26 5/8” (677)
24 3/16’’ (614)
26 5/8” (677)
24 3/16’’ (614)
26 5/8” (677)
* Non-combustible surfaces: as defined in ‘National Fuel Gas Code’ (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by UL.
Clearances of less than 6” (152mm) must be approved by the local codes and/or by the local authority having jurisdiction.
** The cooktop must be supported from the bottom. Provide a platform or some other means of support to set the cooktop on. If the platform is solid, provide a 6” x 12” (152 x 305mm) cutout in the left rear corner for the gas inlet and power cord clearance.
C
E
G
H
D
A
B
F
COOKING SURFACE
* *
* *