DCS BGA27-BQ Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 35

DCS BGA27-BQ Скачать руководство пользователя страница 19

18

TO LIGHT THE GRILL BURNER:

NOTE: Open the grill cover and/or remove the top grate cover before lighting. Turn all knobs to

“OFF”. Turn the main gas supply on. If you smell gas, shut off gas supply and call for service.

Push and hold the igniter button, turn the selected burner knob to “HI”. If burner does not light in
4 to 5 seconds turn knob “OFF” and wait 5 minutes before trying again for any accumulated gas to
dissipate.

MATCH LIGHTING:

If the burner will not light after several attempts then the burner can be match lit. If you’ve just
attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.
Keep your face as far away from the grill as possible and hold and pass a lit match over the hole located
on the top left for burner on the left, or the right hole for the right burner (Fig.16). Push and turn the
control knob which is centered on the burner where the lit match is located, to “HI”. If the burner does
not light in 4 seconds turn the knob off, wait 5 minutes and try again.

Once the left or right burner is lit, the adjacent burner(s) can be lit by the cross-lighting method. For
center burners to cross light, light the adjacent far left or right burner using the standard or match light
procedure. Push and turn the control knob for the desired center burner to “HI”. The gas will be ignited
by the adjacent burners flame. If the burner does not light in 4 seconds, turn knob off, wait 5 minutes
and try again.

LIGHTING INSTRUCTIONS

FIG.16

FIG.17

«
...
17
18
19
20
21
...
»

Содержание BGA27-BQ




































Отзывы:

Нет отзывов