DCS BGA27-BQ, Инструкция по использованию и уходу, Страница: 16 / 35

15
GRILL:
Each grill section consists of a large stainless steel burner, a series of stainless steel heat baffles, a series
of ceramic rods encased in a stainless steel rack, and a stainless steel heat retaining cooking rack. Each
burner is rated at 25,000 Btu/hr. Below each burner is a stainless steel heat baffle which reflects usable
heat upward into the cooking area and reduces temperatures of the drip pan below. Above the
burners are stainless steel radiants which encase the ceramic rods and protect the grill burner ports
from blockage.
RADIANT ASSSEMBLY INSTALLATION:
1. Unpack ceramic rods and remove radiant (Fig. 11) from the unit.
2. Unlock radiant end cap by pushing it up with two fingers (Fig. 12).
3. Place 18 ceramic rods on the radiant (Fig. 13).
4. Lock radiant end cap (Fig. 14).
5. Replace the assembled radiant to the unit (Fig. 15).
NOTE: In case a ceramic rod breaks:
a) Unlock radiant end cap by pushing
it up with two fingers (Fig. 12) or
pliers may be used.
b) Replace broken ceramic rod.
c) Lock radiant end cap.
USING THE GRILL
FIG.11
FIG.12
FIG.13
FIG.14 FIG.15