Do Not Disturb
If you are busy in a meeting and do not want to attend any interruption. You can
program your telephone to ‘do not disturb’ mode.
Just dial 45 and the last 2 digits of your extension number. e.g. if your extension number
is 325, to activate this mode, dial 4525 and replace receiver. To clear this mode dial
4525 again.
Note: you can always judge the mode of your extension by hearing the special dial tone pattern of “do not
disturb”.
Dedicated Trunk To Extension
This feature provides the facility that an incoming call on a trunk dedicated to certain
extension will ring that extension only.
An incoming call on a trunk dedicated to an extension that is busy will cause an alert
tone of 1 second to be heard at three-second interval at that particular extension.
Trunk Receive in Night Service
Trunk can be programmed for ‘Night Service’ by the operator console. All the trunk
groups, except dedicated trunks, can be diverted to extension. The particular extension
rings distinctly for the night service trunk. Upon lifting the receiver, the call is connected
to the extension.
Note: an important difference between trunks dedicated to extensions and extensions in night service an
incoming call will ring on the console as well as on the extension in night service.
Direct Inward Access
DCX-50
plus
provides the facility of Direct Inward Access. An outside caller, calling on
particular preset lines, will immediately be connected to the system and a MASSAGE
will give instructions on how to by pass the operator and get directly connected to the
desired extension.
Call Parking
If you want to transfer call to some other extension, it can be done by parking the call
against a two-digit code.
Consider, for example, extension 305 is connected to a trunk. Now, to park the trunk
hook flash, dial 44 and a two-digit code from 00 to 99.
Содержание DCX-50 Plus
Страница 1: ...DCX 50 Plus EXTENSION USER MANUAL...
