manualshive.com logo in svg

DBLTek ROIP302 Series, Руководство пользователя, Страница: 12 / 31

Поделиться
Скачать
DBLTek ROIP302 Series Скачать руководство пользователя страница 12

ROIP302 Series User menu 

 

e)Switch Port 

 
 
 
 
 

The built-in relay switch is connected to the middle two pins of 
the RJ-11 socket.      It acts as an ON/OFF switch for the external 
system connected. 

 
 
 

f) SIM Card Slot 

The cell Phone SIM slot is located at the bottom of the device.   Remove the plastic cover at 

the bottom to access the SIM card holder.      Slide the metal clip backward and the lift the clip 

upward.      Please the SIM card properly with the cut corner pointing to the edge of the device.     

Place the clip over the SIM card and then slide it forward to lock the clip.   

 

g)Main Unit Setup 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

i.  Connect the Switch Port to an external system for remote control.      It can be used to switch on 

and off a Public Announce (PA) system to instant broadcast.    If the relay switch is 
connected to high voltage load.      The maximum rating for the internal relay is 240VAC and 
500 mA load current. 

ii.  Connect the Channel Port to a Radio Channel via the PPT Adapter Cable provided.      Up to 3 

channels are supported. 

 
www.dbltek.com  

Содержание ROIP302 Series
































Отзывы:

Нет отзывов