Http://www.dbltek.com VoIP FXS+PSTN Gateway
39
WARNING: Once the upgrade starts, a message window is display to show the
upgrade status. DO NOT TURN OFF THE POWER WHILE THE FIRMWARE
UPGRADE IS IN PROCESS!
4.5.2 Change Password
FXS+PSTN series support two login levels to the built-in webpage. The User level is
intended for general user and is restricted from accessing the
Call Settings
page and
Reset Configuration
function. In this level, only the password for the user level can be
changed. The default password for the user level (login ID = user) is “1234”.
The Administrator level allows full accessing to the FXS+PSTN SERIES configurations.
In this level, the password for both levels can be change. The default password for the
administrator level (login ID = admin) is “admin”.
It is important to record the new password(s). If the admin password is lost, a special
star command is available to reset all system settings. Please refer to section 3.1.1 for
more information.
4.5.3 Reset Configuration
This function can only be accessed in administrator login level. Click on the
Reset
Configuration
tab to initiate the reset process. A message windows pops up to ask for
confirmation. Click “Yes” to reset all configurations back factory defaults. Click “No” to
cancel. Once the reset process is completed, the device reboots itself.