manualshive.com logo in svg

DBL Technology VoIP FXS+PSTN Gateway, Руководство пользователя, Страница: 34 / 44

Поделиться
Скачать
DBL Technology VoIP FXS+PSTN Gateway Скачать руководство пользователя страница 34

Http://www.dbltek.com                                                                      VoIP FXS+PSTN Gateway   

 

33

7. 

Media NAT Traversal 

– NAT Traversal can be set independently for Media packets.   

This gives a more flexible setting for various network environment.    Three modes are 

supported: 

STUN(RFC 3489)

, 

Port-forward/DMZ

, and 

Relay Proxy

.  

 

 

Relay Proxy

 mode is a proprietary NAT protocol and it requires the use of our Relay 

Proxy Server.    All VoIP signaling packets are encapsulated (encrypted as well if enabled) 

and transmitted via another port/channel.    Three relay modes of operation are supported. 

 

Mode 1:    Use UDP packets and encryption. 

Mode 2:    Use UDP packets and encryption; use single UDP port. 

Mode 3:    Use TCP packets and encryption; Use single TCP port; 

The mode 2 and mode 3 are the passive and the port use is assigned by the RELAY 

SERVER. 

 

Note

:    For Service providers, RELAY Proxy software is available at no charge.    Please 

contact your supplier for support.    For end user, please contact your service provider to 

see if this feature is available. 

 

8. 

Audio Codec Preference 

– The table below list the voice codec priorities in 

descending order.  Each voice codec can be enabled (place a check mark in the 

check box) or disabled individually.    Select the voice code and then click on the UP 

or DOWN button to move the order on the list. 

 

4.3.3.4 Dial Plan 

Dial Plan defines how a number (VoIP) is processed when FXS+PSTN SERIES receives 

it.    This field is located in the Calling Setting Window and it is available for both H.323 

Phone and SIP Phone.  The Dial Plan is very flexible and can be configured for a wide 

range of dialing applications. 

Содержание VoIP FXS+PSTN Gateway













































Отзывы:

Нет отзывов