Http://www.dbltek.com VoIP FXS+PSTN Gateway
29
non-standard signaling port, add “:<port number>” to the of the location. For
example: If SIP Proxy = yousippbx.com, the signaling port is the standard port 5060.
If SIP Proxy = yoursippbx.com:15060, the signaling port is 15060.
7.
Registry Expiry(s)
– This specifies the expiry duration at the SIP Registrar after a
successful registration. The range is 60 to 36400 seconds.
8.
Outbound Proxy
–
A network node acts as proxy for outbound traffic between a
client and a server. Please contact your network administration to determine if
this proxy is available or not.
9.
Home Domain
– This field enables the use of home domain name is SIP registration
instead of IP address.
10.
Authentication ID
– This field specifies the ID to be used for Authentication during a
SIP registration.
11.
Password
–This field specifies the password used for Authentication during a SIP
registration.
12.
Call Forward Type
– This defines the Call Forward condition and the available
options are:
a)
Not Forward
– Call forward is disabled.
b)
Unconditional Forward
– Call is always forwarded.
c)
Busy Forward
– Call is forwarded when the line is in use / engaged.
d)
No Answer Forward
– Call is forwarded when it is not answered.
e)
Busy or No Answer Forward
– Call is forwarded when the line is in use or not
answered.
13.
Forward Number
– This defines the number to be used for Call Forward.
14.
Backup Server
– The backup option provides settings for a SIP backup server.
Once the designated SIP Proxy and/ SIP Registrar fail, the backups will be used
automatically.
15.
Fax
– Fax function is supported and can be enabled via this field. Fax can be
transmitted via inband signal (
G.711
) or outband
T.38
commands. Please note that
there are many factors that can affect the fax transmission and it may not function
properly or reliably.