DBI SALA 8520215, Руководство оператора

Страница: 15 / 28

4.2 Inspection
4.2.1 Visual
Inspection
A complete visual inspection should be
performed on the FSHRS System equipment
you are using prior to the operation. The
following items should be checked; and the
results recorded on the “Inspection Log” sheet
(see Section 4.3).
1. Labels
Check that all labels are clean and legible.
Clean the labels if any are dirty using a mild
soap and a damp cloth. Replace if any are
illegible (Refer to Section 5 for a listing of all
labels). See Figure 4.2.1.1.
2. Fasteners
Fasteners must be checked and tightened
to the specified torques in Figure 4.2.1.2.
Contact your local dealer or UCL manufacturer
for any replacement fasteners that may be
required.
Bolt Size & Grade Torque Setting
½ in., Grade 5 30-35 ft.lbs (40-48 N.m)
½ in., Grade 8 35-40 ft.lbs (48-54 N.m)
5/8in., Grade 8 35-40 ft.lbs (48-54 N.m)
Do not touch
Threaded Rods
Torque
Locations
Torque
Locations
Figure 4.2.1.1
Figure 4.2.1.2