www.dbtechnologies.com
ES1203
Rev 1.0 cod. 420120253Q
Thank you for choosing a dBTechnologies Product!
The new ES1203 is the most powerful and versatile system in the ES series. It can be easily set up choosing among
mono or stereo configurations, and it comes with one subwoofer (2 x 12” woofers) and two tops (4 x 4” mid-woofers
each, with Logarithmic Curved Column Array technology). The new powerful class-D DIGIPRO
®
G4 amplifier (with
PFC) can handle up to 1200 W RMS and the impressive I/O section allows connecting up to 4 inputs (considering the
Bluetooth
®
connection). The user-friendly control interface with OLED display helps the user to tune precisely the
system. Main carrying and cabling accessories are also included.
1) Unpacking
The box contains:
-No. 1 subwoofer ES1203SUB
, with 3 handles [
Y
] (on
the top and the two sides) and one M20 threaded hole
[
Z
] on the top for pole-mounting (see picture 1).
-No. 2 tops ES1203TOPs
, each of which has one side
with [
X
] 36 mm hole for pole-mounting and one side
with a locking system for the assembly of 2 tops (mono
configuration). Each locking system has one rear safe
lock [
K
] (picture 2).
-No. 1 telescopic pole
. It is composed of 2 screw-on
pieces, it has to be mounted on the top side of the
ES1203SUB ([
Z
] threaded hole) in mono configuration
(picture 1).
-No. 3 audio cables
, with speak-on connectors, two of
which are 7 m (23 feet) long for stereo configuration,
and one of which is 2.5 m (8.2 feet) long for mono
configuration.
-No. 1 mains cable,
with VDE connector.
-No. 1 transport cover for ES1203SUB
-No. 1 transport cover for 2 ES1203TOPs
-No. 4 cable clips
-No. 1 100-120V~ 50-60Hz fuse
-This quickstart and warranty documentation
2) Mount your configuration
MONO:
in mono configuration (see picture 3), you
need to assemble 2 ES1203TOP units (see picture 2):
- Flip one of the two tops as illustrated.
- Align the two locking systems and press on the two
tops until you can hear a “click” from the two rear safe
locks [
K
]. Those locks are both released only once the
system is correctly assembled.
- Assemble the telescopic pole (screwing the two
pieces together), and screw it in the [
Z
] threaded hole
of subwoofer whit right-handed movement.
- Insert one of the two [
X
] holes of the assembled
mono double-top in the telescopic pole and adjust the
final height.
STEREO:
in stereo configuration (see picture 3), you
need two tripod stands (SK-36TT, pole diameter: 35
mm). Insert the [
X
] hole of one E1203TOP on the first
tripod stand, and repeat the same with the second one.
CHECK THAT THE REAR SAFE LOCK [K] IS PUSHED
(NOT RELEASED) BEFORE THE INSTALLATION
WARNING
The speaker is supplied with a mounted fuse for operation
within the 220-240V~ range. If you need to operate in the
110-120V~ voltage range:
1. Disconnect all connections, including the power supply.
2. Wait for 5 minutes.
3. Replace the fuse with the one provided in the package
for the 100-120V~ range
NEVER USE THE HANDLES TO SUSPEND THE SYSTEM!
