DB Audio DS10, Руководство пользователя

Страница: 12 / 22

LED indicators
Each etherCON
®
connector provides the following LED indicators:
[4a] Ethernet link/Activity indicator (green).
[4b] Ethernet Gigabit indicator (yellow).
[4c]
Switch port mode indicator (RGB-LED).
The color coding is as follows:
–
Yellow: PRImary.
– Green: SECondary.
–
Blue: VLAN.
– Orange: PRImary +FILTER (with Multicast filter).
In addition, the switch mode indicator on each port flashes when
the signal bridge detects a subscribed audio channel is not
available on that port, in this way allowing for faster network
troubleshooting. For example, if the Secondary link of the mixing
console is interrupted, the switch mode indicators of the ports
configured as Secondary will flash.
3.4.5. SYNC ERROR/SUBSCRIBED
SYNC ERROR
Illuminates red, when the signal bridge cannot
synchronize to the Dante network.
In addition, when you click the IDENTIFY
button in Dante Controller, the SYNC ERROR
LED will flash rapidly for 2 seconds. This allows
you to physically identify each DS10 when
there is more than one device on the network
(for more details, please refer to the Dante
Controller User Guide).
SUBSCRIBED Illuminates green, when any of the signal
bridge outputs has a configured subscription.
d&b DS10 Manual 1.5 en 12