Raider Pro 250 (single-seat / double-seat): Service Manual EEC Version: 1.0 Oct.. 2004
18
3.4.2 Inspection and Replacement of Gearbox Oil
Inspection of Gearbox Oil level
a. Stay the vehicle on the flat ground;
b. Stop the engine and remove the oil level bolt;
c. Inspect the gearbox oil level;
If the oil level parallels with the oil level bolt hole, it’s normal.
Replacement of Gearbox Oil
a. Replace the gearbox oil with the specified type;
Gearbox Oil Capacity: 0.2 L
Specified Gearbox Oil: Mobil 85w/90
Gearbox Oil Level Bolt Torque: 14-18 N.m
b. Check if there is any oil leakage after running the engine;
Check the oil level again;
c. Check if the gearbox oil seal is damaged, and replace it if
necessary.
3.4.2 Trouble
Shooting
The engine can be started, but the vehicle can’t run.
a. The gears are damaged;
b. The gears are burnt.
Noise
a .The gears are worn or burnt ,or the gear surface is damaged;
b. The bearing is worn or shaking.
Oil Leakage
a. There is too much oil in the gearbox;
b. The oil seal is damaged or worn.