Raider Pro 250 (single-seat / double-seat): Service Manual EEC Version: 1.0 Oct.. 2004
10
soaked the washer and thread part, rotate the spark plug;
b. Clear up the filth and carbon accumulation on the spark plug with a steel brush or a blade;
c. Inspect the spark plug gap (in general it should be about 0.6 - 0.7 mm.);
d. If the carbon accumulation or the wear of the spark plug is too serious, replace the spark plug
with a new one of the same specification.
2.2.2 Tire Pressure / Wear
Check the tire pressure before each of your driving.
The tire pressure is very important for the riding stability.
Specifications: Front Tire: 175kpa
Rear Tire: 200kpa
2.2.3 Brake Performance
a. Always check if there is plenty of brake fluid in the brake fluid
reservoir;
b. Check if the front/rear brake pad is in good condition;
c. Check the brake rotor for abnormal wear.
2.2.4 Air Cleaner
Clean the air cleaner quarterly, or more often when driving in dusty conditions.
If the air cleaner is clogged with dust, its performance will be
severely decreased, even the engine damages will probably be
caused.
Inspection and Cleaning of Filters
Paper Filter
a. Remove the filter from its housing;
b
. Lightly tap the filter on an object to knock out the dust;
c. Replace the filter element if it is wrinkled or torn.
Foam Filter
a. Remove the filter out of its steel cage;
b. Wash the filter in non-flammable cleaning solvent;
c. Submerge the filter in oil and squeeze it to remove excess oil;
d. Install the filter element back into the air box.
1. Before and during the cleaning, inspect the element for tears; replace it if it’s torn.
2. Make sure that the element is seated properly and no foreign material can pass by it
