background image

Raider Classic 250 (double-seat): Owner’s Manual                                    EEC Version:2.0  Feb. 2007 

 

56

 

[F]

 

BRAKE OPERATING SYSTEM 

When the brake is applied, the rear wheels will be locked

 

When the brake lever is pulled upward/ toward direction, the brake is applied and the rear wheels are locked; 
The brake is released and the rear wheels become unlocked.   
The brake lever must be depressed downward when you are ready to drive

 

 

Note : 

1)    Brake effect will decrease when the brake mechanism get over heated. Thus, not to continuously depress   

the brake pedal.     

2)    If the brake mechanism gets wet, the brake effect will be affected. Test the brake system after vehicle 

washing or going through a pool of water by slightly depress on the brake pedal.   

3)    Maintain certain distance behind the front vehicle so that you have enough time to stop the vehicle. 
4)  Do not step on brake pedal unnecessarily, otherwise the brake lining and brake lining disc will be 

damaged. 

5)

   

Never drive the vehicle with the brake lever is in use. 

 
 

Содержание Raider Classic 250



































































































Отзывы: