Dazon Raider Classic 250, Руководство пользователя

Страница: 67 / 98

Raider Classic 250 (double-seat): Owner’s Manual EEC Version:2.0 Feb. 2007
67
.
4. Battery Replacement
Battery failure could be caused by the following possibilities :
i) Low voltage --- Test the voltage by using multi-meter, 9V or below means the battery is weak.
ii) Self-discharge of electricity ---- Quick loss in power after every re-charge of battery.
Observe following steps if replacement is necessary :
4.1) Remove old battery;
Mark which cable is connected to the positive terminal (+) and which cable is connected to the negative
(-) terminal;
4.2) Clean cable connectors with wire brush or sandpaper to remove oxidation;
4.3) After charging, install new battery; put dielectric grease on the battery terminals to avoid corrosion;
4.4) Connect cables to the proper terminals: positive cable to positive terminal, and negative cable
to negative terminal;
z
Charge the battery in a well ventilated area.
z
At the beginning or end of charging, turn off the charger first, in order to prevent electric
spark and explosion.