13
7. Factory settings
Standard
operation
Parameter lock
Standard
operation
run
to
Master code
100%
100%
75%
50%
25%
Display
brightness
to
Display of
decimal point
Default value
to
Device address
Menu items
Parameter
7.1. Synoptical table of default values
7. Factory settings
Parametrisation
The following procedure should be used:
• Switch off the power supply
• Press button [
P
]
• Switch on voltage supply and press
[P]-
button until
„- - - - -“
is shown in the display.
7.2. Reset to factory settings (default values)
To return the unit to a
defined basic state
, a reset can be carried out to the default values.
With reset, the default values of the program table are loaded and used for subsequent
operation. This puts the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
