gram the 4030. These commands may also be issued directly to the
4030 via the optional Extended Keyboard. Commands which are
common to all 4000 Series models are described in detail in the
optional 4000 Series
System Instruction Manual. IT IS RECOM-
MENDED THAT YOU STUDY THE
SYSTEM INSTRUCTION
MANUAL BEFORE YOU ATTEMPT ANY RECONFIGURATION OF
YOUR MODEL 4030 BEYOND THAT DISCUSSED IN THE
APPENDICES OF THE PRESENT MANUAL.
See Appendix B of the present manual for direct RS-232-C connections
between the 4030 and a computer or printer.
Unless otherwise specified, every 4030 comes with the standard
engineering-unit legends and button-function indicators shown in Fig. 1.
Different legend/indicator films may be optionally obtained. Via optional
keyboard or computer, you can instruct the 4030 to light any one or a
combination of given legends and indicators. See Appendix C for
"Legend and Indicator Annunciation."
Appendix D describes a special calibration procedure that may be
applied to a
nonlinear sensor input, instead of the normal "TWO-POINT
(DEADWEIGHT)" technique (Section 2.e).
NOTE: WITH THE EXCEPTION OF APPENDIX C, THE PRESENT
MANUAL WILL ONLY TREAT PROCEDURES AND CONSIDERA-
TIONS WHICH ARE RELEVANT TO THE 4030 "STANDARD
CONFIGURATION" AND WHICH DO NOT REQUIRE A CONNECTED
COMPUTER OR KEYBOARD. FOR INFORMATION ON THE FULL
FUNCTIONALITY OF YOUR MODEL 4030, SEE THE OPTIONAL
SYSTEM INSTRUCTION MANUAL.
MODEL 4030 SPECIFICATIONS (for general 4000 Series Physical,
Electrical, and Environmental specifications—including Logic
I/O—see Appendix A of the 4000 Series
System Instruction
Manual):
Transducer Types: 5- or 7-wire LVDT's capable of 4000-Hz operation
and having primary impedance of 80 ohms or greater; 3- or 5-wire
variable reluctance transducers.
1.a
Model 4030 Description and Specifications
1.3
