Specifi cations
Wiring:
• Use standard wire nuts to join wires
• If possible, always pre-wire prior to permanent mounting
• Verify and match the impedance of any receiver/amplifi er shown in the
wiring confi guration diagrams
• Should you have any questions regarding wiring or installation, contact
your place of purchase
Model number
TT25-8
TT25-16
Power handling (RMS/Peak)
20/30
20/30
Impedance
8 ohm
16 ohm
Frequency response (Hz)
20-80
20-80
Fs (Hz)
40 40
Force Peak (lbs./ft.)*
30
30
Dimensions Diameter x H (in)
3-1/2" dia x 1" H
3-1/2" dia x 1" H
Cut-out size (in)
70 mm dia. with 25 mm slot
70 mm dia. with 25 mm slot
* When used in four PUCK configuration
Dayton Audio
®
Last Revised: 12/29/2020
daytonaudio.com
tel + 937.743.8248
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
5-Year Limited Warranty
See daytonaudio.com for details