6
7
8
5
1
2
3
4
DC 24V
POWER
SUB
OUT
COAXIAL
ANT
PC-USB
AUX
OPTICAL
Thank you for purchasing the Dayton Audio DTA-PRO Class D Audio Power Amplifier.
This amplifier features 50W continuous power per channel (100W total) into 4ohm load.
Class D amplifiers have the quality audio fidelity of a Class AB amplifier while providing
up to 90% power efficiency. And with all the input/output options of the DTA-PRO, it is an
ideal solution for most audio applications.
Features:
• 50W per channel RMS (100W total) into a 4ohm load
• Quality audio output with less than 0.5% THD @ 50W
• Bluetooth wireless connectivity
• USB 2.0 input for direct interface to your computer
• Subwoofer output 1.5v RMS, 150 Hz fixed low pass
• Digital Coaxial Input
• S/PDIF optical input
• Front LED visual display panel
• 3.5mm Aux input
• Multi-function IR remote
Front Panel:
1. Volume/Bass-Treble/Mute control
Rotates to adjust the volume level up or down. Press and release knob to adjust
bass, press again for treble and again for volume control. Press and hold the knob
for mute function, press and hold again will unmute.
2. Power/Source Select
Press and hold this button to turn power on or off, short press to select input source
The selected input source will be visually indicated at the top of the display panel
(BT-Bluetooth, USB, OPT-Optical, COA-Coaxial, AUX-3.5mm)
3. Audio Bit Rate Display
Visually indicates the current audio source bit rate
4. LED Display Panel
Visually displays the status and settings of the DTA-PRO amplifier
Rear Panel:
1. Antenna Connection
Connect the included antenna for Bluetooth wireless operation
2. USB (micro) Input
This USB 2.0 input allows you to play music directly from your computer with no
additional software or drivers required. Simply plug and play for higher quality audio
playback than the typical line output of a computer sound card.
3. Aux Audio Input
3.5mm analog input
4. S/PDIF Input
Toslink input for use with digital audio devices
5. Coaxial Input
Digital Coaxial input for use with digital audio devices
6. Subwoofer Output
RCA-type line level output
7. Speaker Outputs
The speaker output connection binding posts are color coded for easy polarity
identification.
8 .Power Connection
Connect included power supply to the power input port of the amplifier first, then
connect to power source.
Note:
An inappropriate power supply can damage the unit, and will void the warranty.
Remote Control:
1.
Power On/Off
2.
Mute On/Off
3.
Volume Up
4.
Volume Down
5.
Back/Reverse
6.
Play/Pause
7.
Forward/Skip
8.
Bass/Treble (use volume
up/down to change settings)
9.
EQ choose from 6 presets
10.
Input Select
11.
Loudness On/Off
12.
Direct Audio On/Off
Front Panel
Rear Panel
Remote Control
1
2
3
4
BASS/TREBLE
VOLUME
SELECT
ON/OFF
INPUT
SELECT
DIRECT
LOUDNESS
MUTE
EQ
BASS
TREBLE
VOL+
VOL-
1
2
3
4
5
6
7
9
8
10
11
12
