10
4.2.2. Press
until ALU2 indicator lit up
4.2.3. Put down the guard or press
to perform a measuring spin.
4.2.4. In a few seconds the wheel is brought to operating speed and begin measuring unbalance, the unbalance values
remain on instruments 1 and 3 when the wheel stopped. Press
may check the real unbalance value under threshold.
4.2.5. Anticlockwise moving wheel slowly, the displays with right LED’s lit up full indicate the correct angular position
where to mount the counterweights, 12 o’clock position (9H=Off) or 9 o’clock (9H=On) position outside, as Fig.6, add
the counterweight.
Fig. 6
4.2.6. Anticlockwise moving wheel slowly, the displays with left LED’s lit up full indicate the correct angular position
where to mount the counterweights, 12 o’clock position (9H=Off) or 9 o’clock (9H=On) position inside, as Fig.7, add the
counterweight.
Fig. 7
4.2.7. After finishing mounting the counterweights, put down the guard or press
，
to perform balancing spin again,
if comes out 00 00
，
means balancing succeed. (Fig.8)
Fig. 8
4.3
．
ALU
－
S mode
This mode is used for special rim, if ALU1/ALU2/ALU3 can not be used, you should choose ALUS mode.
4.3.1. Turn on machine, press
until the indicator of ALUS lit up.
