87352
④
/
⑧
December 17, 2014
3. Operating the Smartphone Controller
【
Power On
】
While the power is off, press the Power button once.
(The LED indicator lights up or flashes red.)
・
iOS mode ............. Lights up steady.
・
Android mode ...... Flashes.
* The LED indicator lights up or flashes for three
seconds before turning off, and then starts flashing,
indicating that the Smartphone Controller
automatically enters pairing mode.
【
Power Off
】
While the power is on, press the Power button once.
* If the Power button yields approximately 2mm when you push it lightly,
the power to the Smartphone Controller has already been turned on.
【
Pairing
】
(1) OS setting
Before performing the pairing operation, you must select the
OS mode that matches the OS of the connecting device.
While the Smartphone Controller is turned off, press the
Power button while pressing and holding down the Home
button and the Escape button. Repeating this operation will
toggle the OS setting options.
The LED status indicates the current OS setting option as
follows:
* Factory initial setting is iOS mode.
・
iOS … When the power is turned on, the LED indicator lights up
red
for three seconds, and then two small LEDs inside
the indicator alternately flash red.
・
Android …
When the power is turned on, the LED indicator
flashes red.
《
Important
》
Read this before pairing!
The Smartphone Controller may be unable to unlock the screen on certain devices if the screen lock or passcode lock
function is enabled on those devices. Therefore, first disable the screen lock and passcode lock functions on your
connecting device before performing the pairing operation. Also, if the connected device enters sleep mode, pressing the
Home button on the Smartphone Controller may not display the home screen on the device. Daytona Corp. recommends
that you keep sleep mode disabled on the connected device until you learn how to use the Smartphone Controller very well.
(2) Pairing
・
Make sure that the power to the Smartphone Controller is turned off, and then turn it on. In approximately three seconds, the
Smartphone Controller will enter pairing mode. If the LED indicator is flashing red, the Smartphone Controller is ready for pairing.
* If the Smartphone Controller is unable to find a connecting device within approximately 90 seconds after the LED
indicator starts flashing red, then pairing mode will expire and the LED indicator will turn off. In this case, power
off the Smartphone Controller, and then restart the pairing operation from the beginning.
・
Prepare the connecting device for pairing.
* For more information, please refer to the instruction manual for the connecting device, or contact your local
dealer. Please note that Daytona Corp. is unable to answer questions regarding products other than ours.
・
After a while, the flashing LED indicator will turn off, and pairing is complete.
* If the device is still not connected after the flashing LED indicator turns off, please restart the pairing operation
from the beginning.
* If the device is unable to pair with the Smartphone Controller within 90 seconds after the LED indicator changes
from simultaneous flashing to alternate flashing, the LED indicator will automatically turn off.
In this case,
restart the pairing operation from the beginning.
* While the Smartphone Controller is connected to the device, if you press the Power button, the connection
between the device and the Smartphone Controller may not be cut off immediately. If you press the Power button
repeatedly under this condition, operation of the Smartphone Controller may become unstable. Also, the Cross
joystick may not work properly, or other symptoms may occur. In this case, turn off the power to the Smartphone
Controller, and wait to make sure that the connection with the device is cut off completely. Then, turn on the
power to the Smartphone Controller again. The LED indicator will flash (in Android mode) or light up (in iOS
mode) for three seconds, and then it will turn off. And then, when the LED indicator starts flashing again, press
any button other than the Power button once, and try to connect to the device. If the problem is not resolved,
restart the pairing operation from the beginning. If the problem persists after attempting to pair again, try to reset
the connecting device.
* If you are connecting an Android device, select the manufacturer's standard Home screen on the device.
Home screens provided by cellphone carriers are not compatible. Also, please note that navigation and
available options on the screen may vary depending on the device.
While pressing and holding down
the Home button and the Escape
button, turn on the power to the
Smartphone Controller.
Power On
LED
CAUTION
CAUTION
Pressing the Power button
repeatedly toggles
between power on and off.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
