background image

 

is your number one source for Made In The USA 

quality, Comfort Ride™ leveling kits.  Now backed 

Introduction 

with our exclusive 

Go Everywhere 

©  Lifetime Lim-

ited Warranty.  To assure your safety and proper installation of this product, 
take a moment to read all instructions and Product Safety Information before 
trying to install your Daystar® product. Current OEM suspension design is 
complex:  meaning safe and proper installation requires understanding OEM 
service techniques for disassembly and assembly of the components indicated 
together with the instructions and warnings set out below and in the OEM 
service manual and your owner’s manual. 

Daystar® strongly recommends 

seeking advice from or having this product installed by a professional 
mechanic who can inspect your suspension, confirm compatibility with your 
tire and wheel choice and, if needed, reset alignment to optimize your steering 
and the features of your Daystar® Comfort Ride kit

. We are here to help if 

you have remaining technical questions after reading 

Product Safety Information 

Throughout these instructions important safety information is generally pre-
ceded by one of three signal words indicating the relative risk of injury. The 
signal words mean: 

! WARNING  

A hazardous situation which, if not avoided, could result in

death or serious injury. You can be Killed or Seriously Hurt if you don’t fol-
low instructions.

! CAUTION   

A hazardous situation which, if not avoided, could result in

minor or moderate injury. You can be moderately HURT and also may suffer
property damage if you don’t follow instructions.

NOTICE 

      Careful attention is required to this instruction or operation but 

does generally not relate to personal injury. Damage to your product or other 
property may result if you don’t follow instructions. 

!WARNING

Familiarize yourself with all vehicle manufactures’ and Daystar 
warnings, instructions and limited warranties before driving your 
modified  vehicle. Also be aware many states / countries have 
laws governing on-road vehicle heights and modifications. You 
are responsible for assuring the safety and legality of your vehi-
cle. 

Содержание KJ04520BK









Отзывы: