Preface – About Genesis MP
Genesis MP
8
◆
ESD SAFE WORK AREA
IMPORTANT
Many electronic devices are ESD sensitive. Be sure to take the follow-
ing precautions when handling an electronic device:
• When seated, always wear an Anti-static Wrist Strap
• When standing, wear footstraps on a grounded floor mat
• Never attempt installation on a carpeted floor
• Never wear leather shoes (rubber soles are recommended)
• Never attempt installation in an overly dry environment
• Never wear silk or polyester clothing during an installation
• Always remove all jewelry (i.e., rings, bracelets, watches, etc.)
• Always transport electronic devices in static-safe containers:
(i.e., tubes, bags, boxes)
• Always protect parts and assemblies with conductive ESD
approved containers and/or packaging
• Always remove electronic devices in a grounded work area
• Always use field service tools (i.e., screwdrivers, snips, vac-
uums) that are conductive.
Genesis MP is Shipped Complete with an Anti-Static Wrist Strap
The Anti-static Wrist Strap shipped with the Genesis MP is a one-use
disposable safety strap intended for the customer’s use. If you do not
have a re-usable Anti-static Wrist Strap, be sure to purchase one for
each employee that will be handling, installing, servicing, and/or main-
taining equipment.
Grounding Using The Anti-static Wrist Strap
These straps hold a minimum of 1 megaohm resistance. To ensure
proper grounding, this strap must be worn in direct contact with the
skin.
Grounding Using A Grounding Mat
This mat should be used when standing in an electro-static area and
when handling electronic devices. Alligator clips may be substituted
for banana-plug connectors connected to a wrist strap.
Grounding Using Heelstraps/Toestraps/Bootstraps
These straps can be used when standing. These straps may be sub-
stituted for most shoes or boots. The conductive strips must be worn
in direct contact with the skin to be effective.
∆
!
