background image

 

NLC5.1ST User Manual 

FCC Part 15 Regulatory Statement 

 
This equipment has been tested and found to comply with the limits for Class A digital device pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 
with the instruction's manual, may cause interference to radio communications. Operation of this 
equipment in a residential area is likely to cause interference in which case the user will be required to 
correct the interference at their own expense. The user is cautioned that changes and modifications 
made to the equipment without approval of the manufacturer could void the user's authority to operate 
this equipment. The user should use only shielded and/or grounded cables to combat sources of 
interference. 
 

Environmental Preservation Efforts 

 
This equipment has been designed and built by DaySequerra corporation to give 
many years of trouble free service and is backed by our three year warranty and 
commitment of providing the best customer support. When the time comes to retire 
your product from service, it should be disposed of in accordance with local codes or 
ordinances. Do not discard with household or commercial waste. 
 
 

DaySequerra products are manufactured with the environment in mind. The 
directive on the restriction of the use of certain hazardous substances in electrical 
and electronic equipment (2002/95/EC) restricts the use of six specific hazardous 
materials in the manufacture of various types of electronic and electrical equipment. 
Following this directive prevents these toxic substances from entering our 
environment after disposal. 
 

 
 

 

 

 
 
 
 
 
 
 
 
 
 

Содержание NLC5.1ST

































Отзывы: