DAYLIFF ULTRASUN UFD, Инструкция по установке и эксплуатации

Страница: 8 / 16

5
After the expiry of the guarantee period, if the magnesium
anode rod is worn out, the anode rod shall be replaced by a
new one in accordance with the instructions in the users’
manual.
4. SITING
Correct siting is critical for the effective operating of a solar water heater, the following
being important guidelines:-
l
Orientate the principal axis of the units in a North/South direction, with the collector
facing the equator. This orientation is important to maximise sun exposure on the
collector as it tracks on its East /West axis throughout the day.
0
l
Tilt at approx 15 . This is important as it optimises irradiation and also assists in the
thermosyphon process. Heater units should never be laid flat.
l
Avoid any shade, especially between 10am and 4pm. Shade hugely reduces system
efficiency.
Preferably, solar panels should be installed on roofs where solar irradiation is highest and
they are also less exposed to damage. If this is not possible a protected ground sitting is
acceptable.
NORTH
EAST WEST
SOUTH
Hot Water Out Cold
Water In
NORTH
EAST
WEST
SOUTH
Hot Water Out
Cold
Water In
ORIENTATION OF SYSTEM
NORTH OF THE EQUATOR ORIENTATION OF SYSTEM
SOUTH OF THE EQUATOR
This product is designed for water heating purposes using
solar energy and it may not be changed or modified in any
way. It should be installed by a qualified person, who should
observe the applicable local regulations and the building
code.