DAYLIFF SPS-190, Инструкция по установке и эксплуатации

Страница: 4 / 24

A cold swimming pool is an unused swimming pool and in many upcountry areas
swimming pools are too cold to use throughout the year and heating is required. There
are a number of options available, but a particularly effective solution is the Dayliff Heat
Pump. Heat Pumps utilise energy from two sources, heat from the ambient air and
electrical power to run a compressor in a reverse refrigeration cycle, the compression
process extracting heat from the ambient air for transfer to the pool water. The heaters are
highly efficient operating at a Coefficient of Performance (COP), which is the ratio of
energy output to direct energy input, of up to 6 times depending upon the environmental
conditions. They are therefore very economical to run compared with fossil fuel
alternatives though a pool cover must be used to ensure maximum heat retention. Heat
Pumps are simply installed in-line on the filter return to pool pipe and include an integral
controller and a durable housing suitable for outdoor installation. Particular features
include:-
• Low energy consumption for low running cost and low emissions for heating and
cooling applications.
• SPS-190 fitted with a plastic casing, larger sizes with a powder coated galvanised
steel casing for long life
• High efficiency compressor that uses environmentally friendly R410A refrigerant.
• Advanced dual coil titanium heat exchanger for long corrosion free life
• Built-in protection for the compressor, low water flow, high/low pressure and
electrical overload
• Fully automatic and simple to install with minimal plumbing and electric
connections.
Congratulations on selecting a Dayliff Heat Pump. They are
manufactured to the highest standards and if installed and operated
correctly will give many years of efcient and trouble free service.
Careful reading of this Installation Manual is therefore important,
though should there be any queries they should be referred to the
equipment supplier.
1. SPECIFICATIONS