DAYLIFF DDW 400S, Инструкция по установке и эксплуатации

Страница: 4 / 12

1
1. PUMP SPECIFICATIONS
PUMPS
The DAYLIFF DDW submersible pump range are centrifugal submersible pumps
designed for small scale drainage, irrigation, fountain and water transfer
applications. Two versions are available, the standard S version with open
impeller for lightly turbid water and the vortex V version for water with higher silt
loads.
Pump construction is of high strength engineering plastic for the pump casing,
suction base and impeller and an external float switch is provided for automatic
pump control. All pumps are supplied with 10m of waterproof power cable and a
union connected outlet suitable for threaded or hose connection.
MOTORS
Pumps are provided with integral non-overloading induction motors designed for
continuous operation. A thermal cut-out is provided in the motor winding to
protect against pump overload and the pump can be connected directly to the
mains power supply through a 10A fuse or MCB.
3
FLOW RATE (m /hr)
2 4 0 6
PUMP HEAD (m)
2
4
6
8
10
8
DDW 1000V
DDW 750V DDW 750S
DDW 400S
10 12 14 16
DDW400/750S
DDW750/1000V
Congratulations on selecting a Dayliff DDW Domestic Pump. They are
manufactured to the highest standards and if installed and operated
correctly will give many years of efcient and trouble free service.
Careful reading of this Installation Manual is therefore important,
though should there be any queries they should be referred to the
equipment supplier.