DAYGAS DSR Series, Руководство пользователя и инструкция по установке

Страница: 13 / 32

DSR LCD & DSR Premium
Assembly Steps
Step 1 - Assembling the Wall Mount Bracket
Make sure that the floor on which the wall hanger will be mounted has the ability to
support the weight of the device. Make sure that the fixing materials to be used for
mounting the wall hanger on the floor are suitable for the adhesion resistance of the
floor. Complete (4 pieces) of materials used in the wall hanger make sure it is installed.
The gap between the device and the ceiling must be at least 50 cm.
The gap from the base to the device is at least 180 cm.
The space from the floor to the device may vary according to the rates approved by
the regional gas distribution companies.
1- Wall hanger. (Supplied with the device.)
2-
Device extension and fixing feet. (Supplied with the device.)
3- Fixing pins. (For part number 2) (Supplied with the device.)
4- Fixing pins. (For part number 1) (Supplied with the device.)
NOTE: Fixing pins numbered 4 depend on the floor and material to be mounted.
should be selected.
50 cm
Ceiling
50 cm
Device
Base
2
1
3
4
13
www.daygas.eu
Device