4
Main components
1. Control panel
2. Ignition button
3. Grille
4. Oxygen sensor
5. Wheels
6. Rear plate
1
2
3
4
6
5
1
2
6
3
4
5
Gas bottle installation
• Always connect the gas bottle outdoors
• Remove the rear plate (6) from the gas
heater (for set-up, the rear plate is at the
bottom of the gas heater).
• Insert the full gas bottle into the rear of
the gas heater.
• Connect the gas bottle to the gas
regulator and the gas heater (as
described in the instruction manual for
the regulator). Do not twist the � exible
tubing or the hose.
• Attach the rear plate (6) to the gas heater.
Leak test
Check all the gas heater’s connections for
leaks before use.
Perform the leak test with a full gas bottle.
Mix up 25 ml of washing-up liquid and 75 ml
of water.
Check that the regulator is closed.
Attach the regulator to the gas bottle and
open it.
Brush the hose and all the connections with
soapy water solution. If bubbles appear,
there is a leak, which must be dealt with
before you can use the gas heater.
Deal with the problem and carry out a new
leak test.
Before
After
6
6