Daxten LARA, Руководство пользователя, Страница: 14 / 89

2 CHAPTER 1. THE QUICK INSTALLATION GUIDE
ISDN
Ethernet
Serial 1
Keyboard/Video/Mouse
Power
Serial 2
Figure 1.2.: Rear Side Connectors
ˆ
IPMI Version 1.5 connection to the host system using the IPMI Option
cable
ˆ
Serial output for modem dial in connection
ˆ
Serial pass-through via Telnet
ˆ
Initial configuration
SUB-D 9 Serial 2 The serial connector 2 supports the internal and external power options
SUB-D 25 KVM The supplied Keyboard VGA Mouse extender cable has an aggregated SUB D
25 connector to LARA
Power supply A power supply with the following parameters must be attached:
ˆ
Voltage: 12 V
ˆ
Current: > = 1 A
RJ 45 ISDN Using this connector LARA can be connected to an EURO ISDN network (EMEA
versions only)
RJ 45 Ethernet UTP3/5 cables may be used to connect LARA to an Ethernet LAN
Connecting LARA to the host system
Perform the following steps in order to connect the KVM signals of the server system to LARA:
1. Connect the SUB-D 25 to PS2/PS2/Video cable to the SUB-D 25 connector on LARA
2. Connect the (purple) PS/2 Keyboard jack to the keyboard connector of the host system
3. Connect the (green) PS/2 mouse plug to the mouse connector of the host system
4. Connect the VGA HD-15 connector to the VGA monitor output of the host system
5. Connect the power supply as well as Ethernet and/or modem,ISDN, depending how you want
to access LARA
In case you want to connect a local console to the host system besides LARA, you can attach
monitor, keyboard and mouse to the according LARA connectors on its front.
Video modes
LARA recognizes a limited number of common video modes. When running X-Window on the host
system, please don’t use any custom modelines with special video modes. If done so, LARA may
not be able to detect these. You are on the safe side with all standard VESA video modes. Please
refer to Appendix
B on page 67 for a list of all known modes.