Dawson EMV-220 METRIC, Инструкция оператора/Перечень запасных частей

Страница: 9 / 51

‡ 7KHYLEUDWRUVKRXOGRQO\EHRSHUDWHGE\VXLWDEO\TXDOL¿HGSHUVRQQHO
• There should be visual contact between operator and slinger (spotter) at all
times.
•
Monitor the piling operation constantly – interrupt the process immediately
if any danger occurs.
• Do not operate the vibrator if any person is within the Danger Area
– see section 2.1.4.
• Consider machine stability at all times.
‡ 7KHRSHUDWRUVKRXOGLQVSHFWWKHHTXLSPHQWIRUGHIHFWVHYHU\GD\DQG
before being taken into service. Any defects that affect operational safety
VKRXOGEHFRUUHFWHGEHIRUHWKHHTXLSPHQWLVWDNHQLQWRVHUYLFH±VHH
section 5.
• Pay attention to the Safe Working Load of all lifting accessories at all times.
• The working area should be properly illuminated.
‡ :RUNVDIHO\DWDOOWLPHVDQGZLWKLQWKHUHTXLUHPHQWVRIDOOORFDOOHJLVODWLRQ
• The vibrator can become very hot during operation – do not touch it unless
wearing appropriate protective clothing.
Those who are in charge of, or responsible for, the use and maintenance must
HQVXUHWKDWWKHYLEUDWRUDQGDOOLWVDX[LOLDU\HTXLSPHQWDUHLQJRRGFRQGLWLRQ
Piling should only be carried out under the supervision of an appropriately
TXDOL¿HGDQGH[SHULHQFHGSHUVRQZKRFDQDVVHVVWKDWWKHZRUNLVFDUULHGRXW
safely.
The excavator operator must ensure that his communication signals are
understood, by those on the ground, and followed. During piling operations he
must watch out for any potential hazards.
9LEUDWRUVVKRXOGRQO\EHRSHUDWHGDQGGULYHQRQ¿UPJURXQGZLWKFOHDUYLVLELOLW\RI
the working area and the process monitored constantly.
The vibrator stand must stay upright and horizontal (at all times) to avoid
personnel injury. Do not operate the vibrator if any personnel are within a 15m
(50’) radius of unit –
The Danger Area .
%HIRUHWKHVWDUWRIDQ\SLOLQJZRUNLWLVXSWRWKHFRQWUDFWRUWR¿QGRXWLIWKHUHDUH
any underground obstacles within the working area which could be dangerous to
personnel. In the case of unforeseeable contact or damage of an underground
obstacle, then work must stop immediately and the person in charge informed.
2.1
BASIC SAFETY POINTS
2.1.1
WHO IS RESPONSIBLE?
2.1.2
WORKING CONDITIONS
2.1.3
WORKING NEAR
UNDERGROUND
OBSTACLES