14
Set the rotary switch to the “
” position. Manual
range can be chosen by pressing the “
RANGE
”
button. Hold “
RANGE”
to go back to Auto range.
Connect the tip of the Meter probe and test lead
(or test clip) across the resistance or circuit under
measurement and read of the reading from LCD.
NOTE:
o
The Meter may take a few seconds to reach
steady reading if the measuring resistance is
above 1MΩ.
o
When the input is not connected (i.e. an open
circuit) the figure ‘OL’ will be displayed.
Diode Test
Rotate the probe knob clockwise to extend the
probe from the Meter.
Insert the black test lead or test clip in the “
COM”
jack.
Set the rotary switch to the “
” position. Press
“
FUNC
.” to choose diode measurement; “
” is
displayed.
Connect leads to the circuit terminals.
Read the measurement from the display.
