12
chosen by pressing the “
RANGE
” button. Hold
“
RANGE”
to go back to Auto range.
Connect the probe tip of the Meter and tip of the
test lead (or test clip) across the power source or
load.
Read the measurement from LCD display. The
polarity of the Meter’s probe will be indicated.
NOTE:
In small voltage range, the Meter may show unsteady
reading when test leads are not connected to the circuit,
this is normal because of the sensitivity of the Meter.
When the Meter is connected to the circuit, true
readings will be displayed...
DC/AC Current Measurement
WARNING
USE CAUTION WHEN MEASUREING HIGH VOLTAGE
CIRCUITs TO AVOID ELECTRICAL SHOCK AND
INJURY. DO NOT TEST VOLTAGES HIGHER THAN
DC/AC 600V.
Rotate the probe knob clockwise to extend the
probe from the Meter.
