11
In manual range, ‘
OL
’ is displayed when overload
occurs. Choose a higher range if possible to acquire
correct reading.
To perform measurement, first connect the test
lead to common (COM), then connect the probe tip
of the Meter to the circuit to be tested.
If the battery voltage is less than 2.4V, “
”is
displayed, please change a new battery.
DC/AC Voltage Measurement
WARNING
USE CAUTION WHEN MEASUREING HIGH VOLTAGE
CIRCUITS TO AVOID ELECTRICAL SHOCK AND
INJURY. DO NOT TEST VOLTAGES HIGHER THAN
DC/AC 600V.
Rotate the probe knob clockwise to extend the
probe from the Meter.
Insert the black test lead or test clip in the “
COM”
jack.
Set the rotary switch to the “
V
” position.
Press the "
FUNC.F
" button to switch between DC
and AC measurements. Manual range can be
