10
Cold water inlet supply line
feeds through faucet then to
tank via the connection at the
rear corner on the top of the
hot water dispenser.
Make sure countertop has a
1 1/4” to 1 3/8” (32mm or
35mm) mounting hole.
1 3/8”(35mm) maximum
countertop thickness.
Quick-connect fitting
with filter and cap
connects to cold water
supply line filter and
cap side points toward
faucet.
Shut-off valve
Center outlet sends hot
water to dispenser
when faucet is turned
on.
Be sure thermostat knob is turned fully
counter-clockwise to the lowest setting
during installation.
Approximately 36”(914mm) electrical outlet to tank
CAUTION : Tank must
be mounted in the
vertical position.
Before switching on the
heater, ensure water
flows from faucet.
OVERVIEW OF A COMPLETED SET-UP
