background image

10

Mode and meaning of the indicator light

The indicator light is always on, indicating that it is not selected.
The indicator is flashing, indicating that it has been selected.
The indicator lights flash quickly to indicate that something is wrong.

Water level

In the process of washing (including rinsing), if you want to fill the water, you can press the "start/

stop" key, then press the parameter key to select "water level", then press the "set" key to select

higher water level, and then press the "start/stop" key to run, the washing machine will 

automatically feed water to the set water level, and then continue to run.

If the changed water level is lower than the current water level in the barrel, the machine will

continue running after a pause, and the changed water level will be reflected in the next time the

water comes in.

Automatic filling of water is the process of "soaking", "washing" and "rinsing", if the washing

machine detects that the water level drops below the water level by set, the washing machine will 

be suspended, and automatically rehydrate to set water level and continue operation.

After selecting the program, water level and other parameters, press this key to start operation.
Press this button during operation to suspend operation, and press this button again to continue 
running until the remaining time is completed.

At the initial state of startup, the detergent lamp is shiny, indicating that the function of

automatically putting detergent is selected. Press the function key this time to select detergent,

softener, and barrel self-cleaning. Followed by no choice - softener - det softener - tub

 

clean - detergent, the selected will shiny.

At the initial state of startup, press the function button for more than 2 seconds to switch to the 

selection of water recycle and air drying, which in turn is water recycle - air drying - no selection.

Press the function button for more than 2 seconds again to switch to the above detergent,

softener and barrel self-cleaning options.

After washing machine starts, press function key to select child lock, press again to cancel

child lock.

Initial state

Switch on, press the "power switch" button, and the machine enters the initial state:

a. If there is no water in the inner bucket, the machine will in "fuzzy" working state, the detergent

    lamp is shiny. Wash (default 15 minutes), rinse (default 2 times), spin (default 7 minutes) will

    twinkle; nixie tube display "- - "; program display  "normal". If press "start/pause" directly

    (press "program" chose "heavy" also have fuzzy function), the machine will fuzzy sensing, sense

    the amount of clothing automatically. Set water level and finish the whole process of washing.

b. If there is water in the inner bucket, the machine will not in "fuzzy" working state, detergent lamp

    is shiny; wash (default 15 minutes), rinse (default 2 times), spin (default 7 minutes) will twinkle;

    water level default 7 levels; program display "normal"; nixie tube display water level "7", after 5

    seconds display the time of program.

Control panel instruction

Operation

9

Load laundry

Operation

The capacity of washing and spinning of the machine refers
to the largest weight of the standard laundry under dry 
conditions. Washing quantity shall be lower than the rated 
capacity. The maximum capacity of this machine is 8.0 kg.
Different thickness, size and type of the laundry will 
influence the actual washing capacity. It is suitable that 
the laundry can be turned around normally during washing.
Do not select high water level when the laundry are less than
1.5 kg to avoid water splashing.

There is no laundry powder input. If the user USES the washing powder. Please follow the

instructions and press the "auto drop" button, once after starting up the machine to cancel

the auto drop function.

1.Dissolves directly in the washing machine.

   Inject a little water.

   Put in the washing powder and run for

   about 30 seconds to fully dissolve it.

   Put in the washes and choose the

   appropriate water level.

2.The instant solution method of washing powder

   Prepare the container and approximately 30

o

   of warm water.

   Whisk and add the washing powder to dissolve it.

Refer to the instructions of washing powder for the amount of washing powder.

Low foam detergent is recommended.

Please refer to the instructions of washing powder for the dosage of concentrated

washing powder.

Notice: Washing powder is easier to pollute than detergent, so use it in moderation.

             If the washing powder is of poor quality or has been ineffective for a long time, it

            may become lumpy. Please pay attention to cleaning the detergent box in time.

How to use liquid detergent

   Can be directly put into wash bucket. After starting up, press the "auto drop" button once

   to cancel the auto drop function.

   Auto drop: Open the lid of the water box and pour the detergent into the detergent box

   (the box can hold about 1.5L) (as shown in the figure below)

   The washing machine will automatically add detergent when the machine is turned on.

    After putting the clothes and setting the water level, users do not need to add detergent.

   The washing machine will automatically add detergent according to the water level set by

    users. When the detergent in the detergent box is insufficient, the washing machine will

   alarm and prompts the user to add.

How to use a softener

   

Please refer to the product manual for injection amount of softener. Manually add the

   softener to the washer bucket during the last "rinsing".

   If the softener is put into the softener box through the washer port, please be careful not

   to exceed the rib in the softener box. The washer will automatically add the softener to the

   washer bucket during the last rinse.

   Use concentrated softener diluted with 3 times water.

How to use bleach

   After the water is injected to the specified water level, dilute the bleach in the container

   and slowly pour into the wash bucket.

   Bleach should not contact the detergent directly. Bleach should be avoided in coloured

   or patterned clothing.

   Powder - type bleach should be used after dissolving.

   Use method and the amount of bleach should strictly as per the instructions.

Indicating rib

Water box lid

Detergent

box 

Softener

feed in 

Water Recycle Air Dry Child Lock

Detergent Softener Tub Clean

Normal

Eco+

Fast

Delicates

FUNCTION

Содержание DWT 1166 X ADS+












Отзывы: