Settlement
Insert the plug tightly.
Check the socket or change to another socket
Press the power switch.
Check the power supply.
Install the inlet hose again.
Tighten the connector of the machine.
Restart when water supply is resumed.
Open the tap.
Clean the filter according to before “clean inlet gate”.
The machine is adjusting automatically.
Close the top lid.
Normal
Normal
Notes: If there is still a fault after the above checks, please pull out the plug and
contact the seller right away. It is dangerous to repair this product by yourself.
Put down the drainpipe.
Straighten or clean the drainpipe.
Settlement
15
16
Other functions
1. Give an alarm
E1
E3
E2
F1
E4
E0
Display
Explanation
Settlement
The top lid is opened
when preset is started.
Close the top lid and clear up the alarm.
After draining for 7 minutes,
it still does not reach to
water level.
Open top lid, according to before
troubleshooting and settlement to
settle it, then close the top lid and
clear up the alarm.
The top lid is open while
spinning.
Close the top lid and clear up the alarm.
Spin does not balance.
Open the top lid, make the laundry
place equally, then close it and clear
up the alarm.
After 40 minutes, the inlet
still does not reach the
settling water level.
Open top lid, according to before
troubleshooting and settlement to
settle it. Then close the top lid and
clear up the alarm.
Water level sensor is wrong.
Cut the power supply and call the
technicians.
E5
Child-lock light is
flashing synchronously
The top lid is opened
after setting child-lock.
Close the top lid and clear up the
alarm.
Detergent lamp is
twinkling quickly
Detergent lamp is
twinkling quickly
At the initial state of the
machine, the liquid in the
detergent box is
automatically put into default
when it is not enough.
Add manually, release alarm.
Eb
Add manually, release alarm, press
"
"
to resume running.
start/pause
Automatic adding by default,
when the liquid in the
detergent box is not enough,
need add manually.
vibration testing system will supervise the running. Once the vibration is beyond a certain
3. Power supply is cut off automatically
machine to vibrant violently. This machine has an imbalance adjustment function and the
During spinning, if the laundry is not placed equally in the tub, it would cause the
2. Imbalance adjustment
level, the adjustment system will start to adjust the imbalance automatically.
1) Press the power supply button. If it does not start the program in 10 minutes,
the power supply will be cut off automatically.
2) After the washing is finished, the buzzer will remind, and the power supply
will be cut off automatically.
