daviteq WSSFC-V1A-025, Руководство пользователя

Страница: 4 / 8

For the Uplink Payload structure, please refer to this link .
Figure 3. Dimensions of Sigfox Transmitter Figure 4. Dimensions of V1A vibration sensor module
The Sigfox-Ready V1A vibration sensor combines a wireless transmitter WSSFC and a V1A vibration sensor. Therefore,
the installation will be divided into 02 parts:
INSTALLATION GUIDE FOR V1A SENSOR MODULE
INSTALLATION GUIDE FOR WIRELESS TRANSMITTER.
PLEASE SEE THE BELOW STEPS.
Mount the wireless transmitter on the wall or a pole nearby the object to monitor the vibration. The wireless
transmitter must be mounted at the minimum level of 2m from the ground for a better RF signal. To get the
strongest RF signal, please follow
this link .
How to mount it with a mounting bracket? please check this guide .
Insert the batteries into the wireless transmitter and check the system to see whether the wireless transmitter
already sent the first message to the system. Please follow this link to learn how to
install the batteries.
Connect the M12 cable to the V1A sensor module as below figure.
Note: Please select the right Payload document to suit the FW version of the sensor
1.5 Sensor Installation
1.5.1 Dimension drawings
1.5.2 Installation
ATTENTION:
REVERSED POLARITY OF BATTERIES IN 10 SECONDS CAN DAMAGE THE SENSOR CIRCUIT!!!