6
Sensor cutting:
After flange installation, we determine the length of the sensor to be installed as picture below:
C = L+20+20-(H+14) => C = L+26-H (mm)
C: Length to be cut.
L: Original length of the sensor.
H: Height of the tank.
*Example:
Sensor length is L = 2000, H = 1700 mm => C = 326 mm => Cut the sensor pipe length of 326
mm.
7
Calibration:
After cutting, make sure the sensor tube is clean.
Re-plug the Filter footer and tighten the screw.
Turn on the sensor in at least 30 seconds in order for the sensor to automatically
recognize its new length.
