CAP10G-MN-EN-01
OCT-2020
CAP10G is the industrial version of PulseCAP10, designed specifically for generator fuel monitoring applications. The
CAP10 has 240..33 ohms resistor output allowing direct connection to a generator controller. It is compatible with most
popular generator controllers on the market such as DEEPSEA, EMKO, DATAKOM, COM AP, MGS, SMART GEN,
WOODWARD, POWERCOMMAND ... CAP10G with high precision up to 0.5%. Measuring range from 100mm - 3500mm.
The sensor has CE EMC certification according to EN61236-1 standard.
The technicians who install sensor, must be graduated from college of mechanic or electric.
The mechanical installation staff (drill, cut, grind, etc.) must have skills in mechanical engineering.
The electrical installation staff (connect, etc.) must have skills in electrical engineering.
The technician must be trained before using.
CAP10G is intended to use with Diesel Oil, Vegetable Oil.
CAP10G must not be used with other flammable fluid such as Gasoline, Alcohol, Ethanol, Acetone, Toluene or
other solvents.
USER GUIDE FOR FUEL LEVEL
SENSOR RESISTIVE OUTPUT
CAP10G
This document is applied for the following products
1. Introduction
2. Notes
3. Safety
