CAP10CNR-MN-EN-01
JUN-2020
CAP10CNR is industrial version of PulseCAP10, designed for industrial applications like generator, stationary fuel tank
in factory, building, construction site...CAP10CNR has RS485/ModbusRTU output, can be connected easily to any
industrial devices like PLC, IoT Gateway, iConnector... CAP10CNR has very high accuracy 0.1% of span, can be used for
tank up to 30.000 liters volume.
The technicians who install sensor, must be graduated from college of mechanic or electric.
The mechanical installation staff (drill, cut, grind, etc.) must have skills in mechanical engineering.
The electrical installation staff (connect, etc.) must have skills in electrical engineering.
The technician must be trained before using.
CAP10CNR is intended to use with Diesel Oil, Vegetable Oil.
CAP10CNR must not be used with other flammable fluid such as Gasoline, Alcohol, Ethanol, Acetone, Toluene or
other solvents.
Be careful while drilling, cutting, grinding, etc. The fuel tank or other flammable fluid.
Daviteq is not responsible for compensation in case of explosion to bodily injury or property damage.
USER GUIDE FOR RS485 FUEL
LEVEL SENSOR CAP10CNR
This document is applied for the following products
1. Introduction
2. Notes
3. Safety
