- 12 -
Setting the clock time
•
Press and hold the „Clock set“ – button for 2 seconds until either the „12“ - or „24“ digits flash.
•
Press the „+“ or „-“ button to select between 12 hour and 24 hour real time clock display.
•
Press the „Clock set“- button to confirm the setting. The hour indication on the display flashes.
•
Press the „+“ or „-“ button to select the current time for hour.
•
Press the „Clock set“- button to confirm the setting and the minute indication on the display flashes.
•
Press the „+“ or „-“ button to select the current time for minute.
•
Press the „Clock set“- button to confirm the setting, and the display shows the set clock time.
Setting the alarm time
•
Press and hold the „Alarm / Set“- button for 2 seconds until the hour indication flashes.
•
Press the „+“ or „-“ button to select the time for hour.
•
Press the „Alarm / Set“- button to confirm the setting and the minute indication flashes.
•
Press the „+“ or „-“ button to select the time for minute.
•
Press the „Alarm / Set“- button to confirm the setting.
Setting the snoozing time
•
Press and hold the „Snooze“ – button for 2 seconds until time flashes.
•
Press the „+“ or „-“ button to select the time for minutes between 5 and 30 minutes.
•
Press the „Snooze“ – button to confirm the setting.
Using of the wake up function
The VITAclock
®
Traveller offers different possibilities how you can wake up.
For that a
slide switch
, located next to
the snooze button, can be adjusted to different positions.
A) Wake up with buzzer and light with gentle wake-up function (Sunrise function)
•
Slide the switch to the position
.
•
As described above you have to set the
time, alarm time and then the snooze time
.
•
The light intensity of the light alarm clock increases gradually and naturally like a sunrise within 30 minutes to the
alarm time. If you set for example the alarm time to 6:30 clock the light will slowly get brighter at 6.00 clock. For the
alarm time here for example 6.30 clock the unit reaches the full lighting power and the buzzer sounds.
•
If the bright light illuminates and the buzzer sounds, you can both turn off by pressing the „Alarm / Set“- button.
•
By pressing the „Snooze“ – button the snooze function is activated and the icon of the wake up function located in
front of the unit starts flashing. The buzzer and the bright light will be activated multiple times within the set time inter-
val.
Note:
The light alarm clock uses LEDs, which are arranged in 6 rows. During the gentle wake up process the individual
LED rows are sequentially turned on starting from the botton.
B) Wake up with buzzer and light without gentle wake-up function
•
Move the slide switch, which is located next to the snooze button, to the
position
.
•
As described above you have to set the
time, alarm time and then the snooze time
.
•
After reaching the set alarm time, the buzzer sounds and the light illuminates at once with full light intensity.
