4
4. Enter a name for the station, and, if you have more than one transmitters,
whether or not it should be your primary station. Tap
Done
then
Save
or,
5.
Add More Stations
to continue adding transmitting stations. WeatherLink
Live can “listen” to up to 8 different transmitting stations, in any combination
of Vantage Pro2 or Vantage Vue sensor suites, Sensor Transmitters with up to
five different Davis sensors (anemometer, rain collector, temperature,
temperature/humidity, UV, or Solar), or Wireless Leaf & Soil Moisture/Temp
Stations. Each transmitter must be set to a unique ID. Refer to the User Guides
for more information on setting the Transceiver ID.
Tip:
You can add, delete or edit your WeatherLink
Live and transmitting station information at any
time. Tap the Account icon
in the upper right
corner of the app’s home screen. Scroll down to
your WeatherLink Live and tap the > next to its
name. Tap
Edit
next to your WeatherLink Live and follow the prompts.
6. Your WeatherLink Live station will now appear in the opening “snapshot”
screen of the WeatherLink app, and on your page on WeatherLink.com.
Troubleshooting
The blue LED on my WeatherLink Live is not on.
The device may have “gone to sleep.” Touch the capacitve touch pad (see image
on page 1) to “wake it up.” If the LED still does not come on, make sure your
WeatherLink Live is connected to AC power. If so, try removing power (AC and
batteries) and re-powering the WeatherLink Live.
My WeatherLink Live will not connect to the internet.
If using a Wi-Fi connection: Check to make sure you entered the correct Wi-Fi
password.(The app requires a Wi-Fi with a password.) If using an Ethernet
connection: Reseat the Ethernet cable. Plug the Ethernet cable into a different jack
on the router.
There is no weather data on my WeatherLink.com page and app.
Check to make sure the
WeatherLink Live’s receiver ID
and the sensor suite’s transmitting
ID are the same.
To check your WeatherLink Live ID: open your WeatherLink.com page. Click the
Tools icon;
select
Device Configuration
. To change the ID, click
Edit
by
your WeatherLink Live, then choose the ID in the Change Transmitter ID menu.
(Do not click the X. This will delete all your data permanently.)
Check the station type in the WeatherLink app. If data still does not appear, check
the signal strength. Click the Tools icon
. Choose
Health Data.
The
DavisTalk RSSI signal strength should be above -90. If is not, find a location with
a stronger signal or fewer RF barriers. You can bring the WeatherLink Live and
weather station close together, then move them further and further apart to find a
location with a signal strength >-90.
Downtown Hayward Weather
Devices