2
3. Scroll down to Devices, and tap the
Add
button.
4. Choose WeatherLink Live.
The WeatherLink app will walk you through powering up and connecting your
device as shown in the steps below.
Power Up and Connect Your WeatherLink Live
1. Plug the AC adapter into the socket on
the bottom of the WeatherLink Live,
and plug the adapter into the wall.
There are cable channels to the front
and back, as well as the side, in which
to run the cable.
2. Install the batteries. Open the battery
compartment on the bottom of the
WeatherLink Live. To do this, slide the
cover forward then lift up.
Insert four AA batteries, making sure
you insert them with the positive and
negative ends oriented as indicated on
the underside of the battery compartment cover.
Note:
WeatherLink Live is powered by AC power with battery backup.
AC power is
required; it cannot be set up or run on batteries alone.
It is highly recommended
that you install batteries to prevent loss of data if AC power is lost. If AC power is lost
and you have installed batteries, the WeatherLink Live will stop trying to
communicate with your network, but it will continue to receive and store sensor data.
When AC power is resumed, it will reconnect and send the records it stored during
the outage to the WeatherLink Cloud.
3. The blue LED light will begin flashing indicating that the device is ready to
connect to the smartphone app.
Tip:
The device will “go to sleep” and the blue LED will turn off if you don’t connect the
device within a few minutes. You can “wake it up” when you are ready to proceed by
touching the capacitive touch pad. (See the image on page 1.)
4. With WeatherLink Live “awake,” and your phone next to it, follow the
prompts to connect WeatherLink Live to the internet.
Devices
Add
Devices
Add
Device
Select the device you’d like to install.
WeatherLink Live
AirLink
Cancel
Insert
4 AA
Batteries
To open,
slide cover
forward
then up.
AC Adapter
Socket
Cable
Channels